Chapter 3 - Quiz
Évaluation
0
0
Il n'y a aucun commentaire pour le moment.
Rejoindre ce cours
pour être le premier à laisser un commentaire.
1.
What is the main purpose of the Quattro setup?
2.
Why is the charging current configured?
3.
In a parallel or three-phase system, the configuration must be:
4.
What hardware connects the Quattro to a PC?
5.
Which software mainly allows firmware update?
6.
Which software allows for the complete advanced configuration of the Quattro and Multi?
7.
What is the purpose of the "Accept a wide frequency range" setting in the network configuration?
To allow the Quattro to operate on frequencies other than 50/60 Hz to save energy.
To prevent the Quattro from rejecting power to a generator whose frequency is not perfectly stable.
Synchronize several Quattro on different frequencies in parallel.
To increase the output frequency during PowerAssist.
8.
The PowerControl is used to:
9.
In the "Converter" menu, what exactly does the PowerAssist function do?
It reduces the no-load consumption by 20% by narrowing the sinusoid.
It automatically grounds the output neutral when the AC inputs are open.
It allows the Quattro to add battery power to the AC source when the demand exceeds the configured input current.
It shuts off the inverter according to the level of discharge of the battery.
10.
What is the Virtual Switch in the Quattro?
11.
Before using the Wizards, it is generally necessary to: