Skip to Content
Home └Victron Inverter/Charger : Quattro └Chapter 3 - Quiz

Victron Inverter/Charger : Quattro

0 %

Completed

Course content

Chapter 3 - Quiz

10 XP
Prev Next
Fullscreen Share
Rating
0 0

There are no comments for now.

Join this Course
to be the first to leave a comment.

1. What is the main purpose of the Quattro setup?
Increase your power Adapt its operation to the installation Reduce its size Modify your equipment
2. Why is the charging current configured?
To protect batteries To increase the frequency To reduce AC voltage To disable the charger
3. In a parallel or three-phase system, the configuration must be:
Different on each device Automatic Optional Same on all devices
4. What hardware connects the Quattro to a PC?
Cerbo GX SmartSolar MK3-USB GX Touch
5. Which software mainly allows firmware update?
VE. Flash VictronConnect VRM VE. Live
6. Which software allows for the complete advanced configuration of the Quattro and Multi?
VictronConnect VEConfigure VE. Bus Quick Configure VE. Bus System Configurator
7. What is the purpose of the "Accept a wide frequency range" setting in the network configuration?
To allow the Quattro to operate on frequencies other than 50/60 Hz to save energy. To prevent the Quattro from rejecting power to a generator whose frequency is not perfectly stable. Synchronize several Quattro on different frequencies in parallel. To increase the output frequency during PowerAssist.
8. The PowerControl is used to:
Limit AC Input Current Limit battery voltage Control the Fan Controlling Relays
9. In the "Converter" menu, what exactly does the PowerAssist function do?
It reduces the no-load consumption by 20% by narrowing the sinusoid. It automatically grounds the output neutral when the AC inputs are open. It allows the Quattro to add battery power to the AC source when the demand exceeds the configured input current. It shuts off the inverter according to the level of discharge of the battery.
10. What is the Virtual Switch in the Quattro?
A physical switch located on the motherboard for maintenance. An option that replaces the internal ground relay with an external relay. An Ethernet switch to connect several Quattro in a network. A built-in software switch to control certain functions remotely without an external device.
11. Before using the Wizards, it is generally necessary to:
Disable the Virtual Switch Disconnect the batteries Stop the charger Disable PowerAssist